User Manual and Safety Guidelines – Essential 360 Camera

Last updated: April 27, 2018

User Manual and Safety Guidelines

Product Terms of Use

For product terms of use, please go to https://www.essential.com/legal/product-terms.

Basic safety

Please follow these suggestions and safeguards to decrease the chances of damage to your product or any connected devices, and to lessen the risk of harm or injury, such as from fire, burns, or electric shock:

• Use the product for its intended purposes only.
• Do not open or take apart your product.
• Do not crush, perforate, drop, throw, or try to deform your product.
• Do not short external contacts or circuits, expose your product to open flames or lit substances, or dispose of them in fire, solvents, or water.
• Do not use the product if it isn’t working properly or has been damaged, cracked, or dropped.
• Do not expose the product to water or other liquids.
• If the product gets wet, do not try to dry it using any household device such as an oven, microwave, or hair dryer.
• The product generates heat during normal operation. Avoid prolonged, direct, or indirect skin contact, since this may result in discomfort or burns.
• Prolonged usage may increase product temperature.
• If the product feels hot, discontinue use until it cools.
• Ensure that the area around the product is adequately ventilated. Covering the product affects air flow, which can trap heat and redirect it back to the product. This may affect product performance, and poses a possible risk of fire or explosion, which could lead to serious bodily injuries or property damage.

Basic usage

When using, storing, or cleaning your product:

• Use the provided case for carrying and storing the product to prevent scratching the lens.
• Do not use or store the product in very cold or hot environments.
• Do not place the product near credit cards or key cards with a magnetic stripe.
• Use a clean, soft, dry cloth to clean the product.
• Do not use any cleaning products to clean the product.

Disposal

• Dispose of your product in accordance with local requirements. Do not dispose of it in normal household waste.

Child safety

• Your product contains or comes with small parts and parts with sharp edges that may cause injury or create a choking hazard. To avoid injury or damage, do not leave your product within the reach of small children or allow them to play with them. Consult your physician if small parts are ingested.

Environmental precautions

• Heat or direct sunlight may damage your product. Do not leave your product inside a vehicle or in places where it may get very hot.
• Do not use, store, or transport your product near flammables or explosives (such as gas stations, garages, fuel depots, chemical plants or storage facilities, below deck on boats, or near demolition operations), or areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Sparks in such areas could cause an explosion or fire leading to property damage, bodily injury, or death.
• To prevent damage, do not use or store your product near magnetic fields or in dusty, smoky, damp, or dirty areas.

Pacemaker and implantable medical device precautions

This product, when connected to your phone, emits electromagnetic fields, which can interfere with pacemakers and other implanted medical devices. If you have a pacemaker or other implanted medical device, take the following precautions when your product is connected to your phone:

• Keep the product more than 16 cm (6 in) from the surface of the skin near your pacemaker or other implanted device.
• Hold the product on the opposite side of your body from your pacemaker or other implanted device.
• Do not carry the product in a pocket near your pacemaker or other implanted device.
• If you suspect your product is interfering with your pacemaker or other implanted devices, or have questions about using your product with such a device, turn off your product and consult your physician.

Regulatory Information

UNITED STATES

This device complies with Part 15 of the Federal Communication Commission’s Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications to this product not authorized by Essential could void (1) the electromagnetic compatibility (EMC), (2) wireless compliance of the device, and (3) your authority to operate the product.

This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.

The party responsible for FCC device compliance is:

Essential Products, Inc. 380 Portage Avenue Palo Alto, CA 94306 +1 (888) 444-2222

RF Exposure Compliance (FCC and ISED)

Your 360 Camera is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used with any compatible Essential product. This device is not intended to be operated close to the human body.

California notice

WARNING: This product or its packaging can expose you to chemicals including Bisphenol A (BPA) and lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CANADA

Industry Canada statement This device complies with RSSs of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNRs d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Trademarks

The Essential logo, Essential Products, Essential, Essential 360 Camera, and other marks are trademarks of Essential Products, Inc.

All other trademarks are the property of their respective owners.